Controls
DPG
The Desk Panel DPG1K is an intuitive desk panel featuring the basics of a desk panel: Up and down drive of the office desk.
The DPG is activated by tilting the desk panel in the same direction as the desk is intended to drive – which makes it an intuitive desk panel. The shape of the DPG makes it possible to reach and adjust the desk without even looking at the Desk Panel. This way the user needs not draw away attention from work while changing position.
The DPG1K is small and simple, features modern design and fits all kinds of office desk designs.
Got a question?
- Our team is ready to assist you with technical information, starting a project and more.
Contact now
2D Drawings
3D Models
Desk Panels DPG and Desk Control app user manual
DESKLINE product overview
How to clean your desk panel
Watch and learn how to easily clean your LINAK desk panel/switch in this short instruction video: How to clean it; which cleaning agents to use; and, last but not least, what you need to pay attention to.
Clean your desk panel with a soft damp cloth. Universal cleaning detergents may be used.
To disinfect the desk panel, use a 70% isopropyl alcohol either as a wipe or add a small amount to a soft cloth.
Warnings
The desk panel is not a sealed unit and there are electronics inside it. If liquids or moisture get into an opening, the PCB may be damaged, and the desk panel ruined.
So:
- Avoid moisture penetrating any openings as this may damage the PCB inside the desk panel
- Avoid spraying the cleaning agent or disinfectant directly on the desk panel as moisture may penetrate openings, damaging the PCB inside the desk panel
- Cleaning agents and disinfectants must not be highly alkaline or acidic (pH value must be 6 to 8), and they must not contain bleach or chlorine
- Do not use hand sanitiser gel as a cleaning agent
Alkaline and acidic cleaning agents may, over time, decompose the housing. Hand sanitiser gel may deposit on the desk panel buttons. Over time, the buttons may get stuck, or they may not work properly.
DPG - How to initialise and adjust the desk
To initialise the desk, drive downwards, press and hold the tilt until movement has been performed.
To adjust the desk, tilt the panel down for driving downwards and up for driving upwards.
The desk can only be lowered.
The desk needs to be initialised.
Follow the procedure shown in the video.
The desk cannot be raised or lowered.
Possible problem: Mains not connected to the control box
Try/Solution: Try to connect a lamp or similar to the mains supply to check whether there is adequate supply voltage.
Possible problem: Are plugs mounted correctly in the control box or to the leg?
Try/Solution: Check all connections.
Possible problem: Are there any visible damages on cables, controls, the control box or legs?
Try/Solution: Damaged parts must be exchanged. Contact the company that sold you the desk.
Desk cannot be raised full stroke. Always stops in same position.
The system has set a new end-stop outwards.
To reset a saved position, the desk must be re-initialised. Follow the procedure shown in the video.
Related applications
